Experimental Investigation to Determine Corona Inception Electric Field, Using a Rod-plane Configuration

This paper deals with the measurement of the corona inception voltage for hemi-spherically capped rod-plane electrode configuration  at the point of corona inception for a suitable range of radii on short air gap under AC power frequency voltage. Then, the effect of atmospheric pressure and temperature variation on the corona inception voltage by laboratory tests in comparing to correction factors  of IEC standard atmospheric conditions is investigated.

Hamid JAVADI, Arash PEYDA, and M. FARZANEH
NSERC / Hydro-Quebec / UQAC Industrial Chair on Atmospheric Icing of Power Network Equipment
Université du Québec à Chicoutimi, Chicoutimi, Québec, Canada

Power and Water University of Technology (PWUT), Tehran, IRAN

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *