“> Super heater elements concentrated in very high and clean power at temperature up to 1800 ºc is needed for aluminum melting, oil drying equipment using for power transformers and same that material. There fore, always it is need to minimize power consumption and increase
effectiveness at power reflector customers. This means to minimize heat losses in the High Power Reflector, and to optimize heat performance with
respect to output power and temperature distribution. This can be done by altering the size and form of the insulating ceramic fiber to have as much power as possible ‘reflected’ out from the module. It can also be done by altering the size and form of the element. It has been done and the task solved mainly by heat transfer simulations using COMSOL and MATLAB software’s
